Menu
Menu

Thrifting Denver

DIY Hanging Planters

By: Julia Marchand
Goodwill DIY Hanging Planters

I love being able to repurpose thrifted goods into something that is useful and beautiful without it taking weeks to make. The hanging planters we’ll be putting together today, for example, take only a couple of hours to complete! 

Goodwill DIY Hanging Planters

Here’s what you’ll need to craft your own hanging planters:

Supplies

  • Thrifted ceramic jars (or adjust the project for tins or glassware)
  • Thrifted belt
  • Drill
  • Ceramic tile drill bit
  • Painter’s tape
  • 4 screws that fit properly into the drilled hole
  • 4 coordinating washers
  • 4 coordinating nuts
  • 1 nail
  • Small hammer
  • Scissors
  • Pen or pencil
  • Measuring tool (a sewing tape measure works perfectly)
  • 2 plants
  • Hooks/hardware to hang the planters (if the planters won’t be hung in a stud, make sure you include wall anchors)
  • Safety mask
  • Safety goggles
  • Small piece of scrap wood
Goodwill DIY Hanging Planters

Step 1: After washing your thrifted ceramics, plan the placement of the holes. You’ll need two on each planter. Put a bit of painter’s tape over those areas and mark where you want the holes to be. The tape keeps the drill bit from skidding across the glaze as well as protecting the surface from small cracks the drilling could cause.

Step 2: Gently set a nail on each mark and tap it a tiny bit (so carefully) just to dent the glaze. This creates a starting point for the drill bit to bite into.

Goodwill DIY Hanging Planters

Step 3: You may want to take this one outside as there will be some dust. With your safety equipment on, carefully drill all four of your holes. If the dust is clogging up the hole, try sucking it out with a vacuum or wiping it with a damp cloth or Q-tip.

Goodwill DIY Hanging Planters

Step 4: Remove the tape and wipe the planters down. You may even want to rinse and dry them if there’s a lot of dust inside.

Step 5: Measure and cut the length you’ll need for your belt straps. Mine are each 13” long. After cutting them to size, I rounded all four ends of the straps.

Goodwill DIY Hanging Planters

Step 6: Decide where the holes in your straps should be then mark all four of those. Place the straps, one end at a time, on the scrap wood and hammer the nail through to punch a hole. You may need to wiggle this around quite a bit to stretch it so the screw will fit through.

Goodwill DIY Hanging Planters

Step 7: Thread the screws through the straps and planters one at a time, securing them from the inside with the washer then nut. Tighten as best you can then all you need to do is add greenery!

Goodwill DIY Hanging Planters

Dangling plants like burro’s tail or ivy would look amazing in here, or you can use something seasonal depending on the time of year! Plants can be swapped out easily, by style preference, or to best suit the light wherever you decide to install your planters!

Goodwill DIY Hanging Planters

If you wanted to, you could also include a note which shares the source of your supplies along with Goodwill’s mission: to generate opportunities for people to build brighter futures for themselves and their families. This way, the person who receives your gift knows that these are so much more than just planters. When you holiday shop at Goodwill stores, your gifts just keep on giving, and I can’t think of anything merrier than that.

< Return To List